Project

General

Profile

Actions
Copy link

Bug #4243

closed

Missing network card information in inventories on Centos 5

Added by Dennis Cabooter over 10 years ago. Updated about 7 years ago.

Status:
Rejected
Priority:
2
Assignee:
-
Category:
Web - Nodes & inventories
Target version:
3.1.19
Pull Request:
Severity:
UX impact:
User visibility:
Effort required:
Priority:
Name check:
Fix check:
Regression:

Description

Since Rudder 2.8 more and more inventories are corrupt. After resending them with cf-agent -KI -D force_inventory they are repaired. The most important missing inventory data is network card. Without that, Rudder has no idea about the ip address. Thus, if you use the ip-address in a group criterium, the node will not be added to the group.

Files

inventory.png (79.1 KB) inventory.png Dennis Cabooter, 2013-12-11 16:55
Actions
Copy link
 #1

Updated by Dennis Cabooter over 10 years ago

Screenshot attached.

The inventories are incomplete. However, not all of them. The correct one is now in the failed inventories directory:

# grep "<DESCRIPTION>eth0</DESCRIPTION>" 
/var/rudder/inventories/received/node.example.com-2013-12-11-15-25-13.ocs
# grep "<DESCRIPTION>eth0</DESCRIPTION>" 
/var/rudder/inventories/failed/node.example.com-2013-12-11-15-25-13.ocs-2013-12-11  
      <DESCRIPTION>eth0</DESCRIPTION>
      <DESCRIPTION>eth0</DESCRIPTION>
Actions
Copy link
 #2

Updated by Jonathan CLARKE over 10 years ago

I don't understand these examples. Why would the correct file have two lines about eth0?

Actions
Copy link
 #3

Updated by Dennis Cabooter over 10 years ago

I manually did a "cf-agent -KI -D force_inventory" and now it's ok again:

# grep "<DESCRIPTION>eth0</DESCRIPTION>" /var/rudder/inventories/received/node.example.com-2013-12-11-15-25-13.ocs
      <DESCRIPTION>eth0</DESCRIPTION>
      <DESCRIPTION>eth0</DESCRIPTION>
Actions
Copy link
 #4

Updated by Dennis Cabooter over 10 years ago

Jonathan CLARKE wrote:

I don't understand these examples. Why would the correct file have two lines about eth0?

One is ipv4, one is ipv6. :)

Actions
Copy link
 #5

Updated by Dennis Cabooter over 10 years ago

An additional note:

From the 5 CentOS 5 nodes I added to Rudder today, the incomplete inventory was sent from 2 out of 5 nodes. After forcing to resend the inventory on those 2 nodes, their inventories are now ok.

Actions
Copy link
 #6

Updated by Jonathan CLARKE over 10 years ago

  • Category set to 26
  • Priority changed from N/A to 2

I know it's been a while since you opened this bug, Dennis, but I'm hoping you could provide some further information to us:

For an inventory to be moved to the failed/ directory, it means the inventory-endpoint refused it. Therefore, there will be logs about this is /var/log/rudder/webapp/<date>.stderrout.log. If you still see the same issue, or still have the old logs, could you grep for that filename (node.example.com-2013-12-11-15-25-13.ocs) and send us all the lines around that match?

Actions
Copy link
 #7

Updated by Vincent MEMBRÉ over 10 years ago

  • Target version changed from 2.8.2 to 2.8.3
Actions
Copy link
 #8

Updated by Vincent MEMBRÉ about 10 years ago

  • Target version changed from 2.8.3 to 2.8.4
Actions
Copy link
 #9

Updated by Vincent MEMBRÉ about 10 years ago

  • Target version changed from 2.8.4 to 133
Actions
Copy link
 #10

Updated by Vincent MEMBRÉ about 10 years ago

  • Target version changed from 133 to 2.9.5
Actions
Copy link
 #11

Updated by Vincent MEMBRÉ almost 10 years ago

  • Target version changed from 2.9.5 to 2.9.6
Actions
Copy link
 #12

Updated by Jonathan CLARKE almost 10 years ago

  • Target version changed from 2.9.6 to 2.9.7
Actions
Copy link
 #13

Updated by Jonathan CLARKE almost 10 years ago

  • Target version changed from 2.9.7 to 150
Actions
Copy link
 #14

Updated by Vincent MEMBRÉ almost 10 years ago

  • Target version changed from 150 to 2.10.4
Actions
Copy link
 #15

Updated by Nicolas PERRON over 9 years ago

  • Target version changed from 2.10.4 to 2.10.5
Actions
Copy link
 #16

Updated by Vincent MEMBRÉ over 9 years ago

  • Target version changed from 2.10.5 to 2.10.6
Actions
Copy link
 #17

Updated by Matthieu CERDA over 9 years ago

  • Target version changed from 2.10.6 to 2.10.7
Actions
Copy link
 #18

Updated by Vincent MEMBRÉ over 9 years ago

  • Target version changed from 2.10.7 to 2.10.8
Actions
Copy link
 #19

Updated by Vincent MEMBRÉ over 9 years ago

  • Target version changed from 2.10.8 to 2.10.9
Actions
Copy link
 #20

Updated by Vincent MEMBRÉ about 9 years ago

  • Target version changed from 2.10.9 to 2.10.10
Actions
Copy link
 #21

Updated by Vincent MEMBRÉ about 9 years ago

  • Target version changed from 2.10.10 to 2.10.11
Actions
Copy link
 #22

Updated by Vincent MEMBRÉ about 9 years ago

  • Target version changed from 2.10.11 to 2.10.12
Actions
Copy link
 #23

Updated by Benoît PECCATTE about 9 years ago

  • Category changed from 26 to Web - Nodes & inventories
Actions
Copy link
 #24

Updated by Vincent MEMBRÉ about 9 years ago

  • Target version changed from 2.10.12 to 2.10.13
Actions
Copy link
 #25

Updated by Vincent MEMBRÉ about 9 years ago

  • Target version changed from 2.10.13 to 2.10.14
Actions
Copy link
 #26

Updated by Vincent MEMBRÉ almost 9 years ago

  • Target version changed from 2.10.14 to 2.10.15
Actions
Copy link
 #27

Updated by Vincent MEMBRÉ almost 9 years ago

  • Target version changed from 2.10.15 to 2.10.16
Actions
Copy link
 #28

Updated by Nicolas CHARLES almost 9 years ago

Dennis, does this still happen to you ?

Actions
Copy link
 #29

Updated by Vincent MEMBRÉ over 8 years ago

  • Target version changed from 2.10.16 to 2.10.17
Actions
Copy link
 #30

Updated by Vincent MEMBRÉ over 8 years ago

  • Target version changed from 2.10.17 to 2.10.18
Actions
Copy link
 #31

Updated by Vincent MEMBRÉ over 8 years ago

  • Target version changed from 2.10.18 to 2.10.19
Actions
Copy link
 #32

Updated by Vincent MEMBRÉ over 8 years ago

  • Target version changed from 2.10.19 to 2.10.20
Actions
Copy link
 #33

Updated by Vincent MEMBRÉ over 8 years ago

  • Target version changed from 2.10.20 to 2.11.18
Actions
Copy link
 #34

Updated by Vincent MEMBRÉ about 8 years ago

  • Target version changed from 2.11.18 to 2.11.19
Actions
Copy link
 #35

Updated by Vincent MEMBRÉ about 8 years ago

  • Target version changed from 2.11.19 to 2.11.20
Actions
Copy link
 #36

Updated by Vincent MEMBRÉ about 8 years ago

  • Target version changed from 2.11.20 to 2.11.21
Actions
Copy link
 #37

Updated by Vincent MEMBRÉ almost 8 years ago

  • Target version changed from 2.11.21 to 2.11.22
Actions
Copy link
 #38

Updated by Vincent MEMBRÉ almost 8 years ago

  • Target version changed from 2.11.22 to 2.11.23
Actions
Copy link
 #39

Updated by Vincent MEMBRÉ over 7 years ago

  • Target version changed from 2.11.23 to 2.11.24
Actions
Copy link
 #40

Updated by Vincent MEMBRÉ over 7 years ago

  • Target version changed from 2.11.24 to 308
Actions
Copy link
 #41

Updated by Vincent MEMBRÉ over 7 years ago

  • Target version changed from 308 to 3.1.14
Actions
Copy link
 #42

Updated by Vincent MEMBRÉ over 7 years ago

  • Target version changed from 3.1.14 to 3.1.15
Actions
Copy link
 #43

Updated by Vincent MEMBRÉ over 7 years ago

  • Target version changed from 3.1.15 to 3.1.16
Actions
Copy link
 #44

Updated by Vincent MEMBRÉ over 7 years ago

  • Target version changed from 3.1.16 to 3.1.17
Actions
Copy link
 #45

Updated by Vincent MEMBRÉ over 7 years ago

  • Target version changed from 3.1.17 to 3.1.18
Actions
Copy link
 #46

Updated by Vincent MEMBRÉ about 7 years ago

  • Target version changed from 3.1.18 to 3.1.19
Actions
Copy link
 #47

Updated by Alexis Mousset about 7 years ago

  • Subject changed from Corrupt inventories on Centos 5 to Missing network card information in inventories on Centos 5
  • Status changed from New to Rejected

No answer on this issue, and this problem has not be seen lately.

In addition we updated fusioninventory. Closing, feel free to open a new bug if you see it again.

Actions
Copy link

Also available in: Atom PDF